BEAM 4500A Central Vacuum & Deluxe Air Cleaning Kit

Description

The BEAM Hybrid Series model 4500A Central Vacuum Power Unit comes with four commercial grade 6.6″ two Stage By-Pass motors. The upper cylinder is made of steel, so it’s built to last. The Secure Seal System always allows the 7.0 gallon dust bucket to be firmly connected to the canister, so nothing escapes back into the air.

Easy Power Control

To operate, simply plug the hose into one of the handy wall inlet valves. The metal ring on the cutoff of the hose will complete a low-voltage electrical circuit, which in turn activates a relay and turns on the system’s power unit. To turn off the power unit, simply unplug the hose from the inlet. There are optional hoses available with an on/off switch located on the handle.

7.0 Gallon Dirt Capacity

The unit’s 7.0 Gallon dirt receptacle offers the ability for a disposable bag option or for it to be used as a bagless system. Either option can be done without any additional adaptors. (A disposable bag is included for trial)

Low Maintenance

The motor never needs lubrication; bearings are permanently sealed and lubricated. With the self-cleaning filter, there is no need to vent outside, as it removes any impurities left in the air before it is recirculated. If you have pets, it is recommended to vent outside to prevent pet odors from being recirculated.  This unit is equipped with an integrated hour meter which allows for better tracking and control over unit maintenance.

Sound Insulating Package

The BEAM Hybrid 4500A is equipped with a sound insulating package along with a dampening muffler, which reduces the noise emitted by the unit.

The BEAM Deluxe Air Cleaning Kit Includes:

• 30′ BEAM Progression Crush-Proof Air Hose with Two-Way Switch on Swivel Handle – Upgrade to 35′ Hose Available
• 12″ Deluxe Floor Brush
• 8″ Deluxe Crevice Tool
• Deluxe Dusting Brush
• Deluxe Upholstery Tool
• Tool Caddy
• Telescopic Wand
• Hose Hanger

Features:

Easy Power Control

To operate, simply plug the hose into one of the handy wall inlet valves and flip the 2-way Switch to “ON” mode. The metal ring on the cutoff of the hose will complete a low-voltage electrical circuit, which in turn activates a relay and the hoses 2-way switch system. To turn off the power unit, simply turn the 2-way Switch back to “OFF” mode and unplug the hose from the inlet.

Additional information